GB/IE
- 7 -
•
The operator is responsible for com-
plying with local safety and installation
regulations (ask an electrician if you are
in any doubt).
•
The user is required to take suitable
measures (e.g. installing an alarm sys-
tem or a reserve pump, etc.) to prevent
damage arising as a result of flooded
rooms in the event of faults with the
pump.
•
In the event of a failure of the pump, re-
pair work may only be carried out by an
electrician or by ISC after-sales service
personnel.
•
Use only original spare parts.
•
The pump must never run dry or be used
when the intake line is fully closed. The
manufacturer’s warranty does not cover
damage caused to the pump as a result
of running it dry.
•
The pump must not be used to operate
swimming pools.
•
The pump must not be installed in the
drinking water pipeline.
•
The maximum temperature of the fluid
must not exceed +35°C.
•
Do not use this equipment to pump in-
flammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acid,
alkali, silo seepage, etc.) and liquids
with abrasive (emerizing) substances
(sand) must likewise be avoided.
1. Garden pump
2. On/O switch
3. Mounting holes
4. Water drain screw
5. Suction connector
6. Water ller screw
7. Pressure connector
8. Carry handle
9. Screw (2x)
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces
(if present).
•
Check to see if all the items are sup-
plied.
•
Inspect the equipment and accessories
for damage in transit.
•
If possible, keep the packaging until the
end of the guarantee period.
•
Garden pump
•
Carry handle
•
Screw (2x)
•
Original operating instructions
•
For irrigating and watering landscaped
areas, vegetable beds and gardens.
•
For operating lawn sprinklers.
•
With preliminary filter for drawing water
from ponds, streams, rainwater butts,
rainwater cisterns and wells.
For the pumping of clear water (freshwater),
rainwater and mild suds/ service water.
•
The maximum temperature of the fluid
must not exceed +35°C.
•
Do not use this equipment to pump in-
flammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acid,
alkali, silo seepage, etc.) and liquids
with abrasive (emerizing) substances
(sand) must likewise be avoided.
Anleitung_LB6_4171185.indb 7 02.11.11 09:03
Kommentare zu diesen Handbüchern